BIG SLITTER

MÁY XẺ BĂNG LỚN

SMALL SLITTER

MÁY XẺ BĂNG NHỎ

BIG LEVELER SHEARING

MÁY CHẶT TẤM LỚN

PRESSING MACHINE

MÁY DẬP LÕI MÔ TƠ

CUTTING CORE LINE

MÁY CẮT LÕI MBA

TANZAKU

MÁY CẮT TẤM NHỎ

thông số kỹ thuật / thành phẩm

CUTTING CORE MACHINE SPECIFICATION

THÔNG SỐ KỸ THUẬT MÁY CẮT LỖI BIẾN ÁP

Items	Dimensions
1. Decoiler
Coil weight per side	Max. coil weight: 2500kg
Diameter of expanding mandrels	Min.430mm
Clamping range of decoiler	470-520mm
Coil outer diameter:	Max.1000mm
Mandrel heads	2
2. Strip aligning system
Minimum strip width	40mm
Maximum strip width	450mm
Maximum opening	470mm
Readout value of guidance - setting	0.1mm
3. Roller feeding system
Maximum speed	288 m/min
Resolution of the measuring wheel	0.0063 mm
Feeding accuracy	+/- 0.1 mm
4. Notching tool
Number of tools
V-cutting depth
Displacement valule, transverse	+/- 30 mm
5. Hole punching tool
Number of tools	1
Diameter of punch and die	Suitable hole diameter: 8-25mm , our stock φ 8,10,12,14 mm
6. Shearing tools
Number of tools	2
Shear 1	45° Yes
Shear 1 moveable for 90 cutting	Manually
Shear 2	135° Yes
Accuracy of angle	< 0.005°
7. Lamination transport system
Strip width	Min.40 mm
Strip width	Max.450mm
8. Stacking unit
Number of stacking levels	2 units
Lamination sheet length centre line	250 ~ 2500 mm
Stacking height	450 mm
Stacking accuracy longitudinal	+/- 10 ~ 20 mm
8.1 Stacking cars
Number of cars	2 units
Stacking levels per car	2 units
Width of the car	1000 mm
Length of the car	2500 mm
Load per level	2500 kg
Total load	Max. 5000 kg
8.2 Lamination sheet dimenstion
Lamination sheet width	40 ~ 450 mm
Lamination sheet length centre line	Min .250 mm
Lamination sheet length tip to tip	Max .2500 mm
All lamination shapes with and without holes	Max 20 holes/plate
Step lap : All variations of step-lap	Vertical, horizontal, user defined
Sheets per step, programmable	Max.99
Number of steps , programmable	Max.99
Center leg: Offset from tip to tip	+/- 20 mm
8.3 Strip material
Material	Cold rolled silicon steel
Materilal thickness	0.23 ~ 0.35 mm
(*) Strip quanlity
Camber at 1500 mm length	Max. 0.5 mm
Ondulation (Wave)	Max. 1%

Items	Dimensions
1. Decoiler
Coil weight per side	Max. coil weight: 2500kg
Diameter of expanding mandrels	Min.430mm
Clamping range of decoiler	470-520mm
Coil outer diameter:	Max.1000mm
Mandrel heads	2
2. Strip aligning system
Minimum strip width	40mm
Maximum strip width	450mm
Maximum opening	470mm